Main Application and Feature
Mainly used for sonic and ultrasonic detection; it can be applied in Nondestructive Testing (NDT) of rock mass and concrete, census (general survey) and follow-up of construction quality, single-hole logging, cross-hole logging. Widely used in testing of strength, internal defects, cracks, joint surface quality and damaged layer thickness, pile foundation quality, sonic logging and parameters of material elasticity, etc.
System Configuration
· Storage Capacity: no less than 1GB
· Communication Interface Standard: USB2.0
· Displayer: TFT 640×480
·Communication Interface Standard: USB2.0
· Optical Knob: For screen operation, equal to mouse
· Keyboard: Membrane Keyboard
· Power Indication: Power Under-Voltage Indication
· Power Supply: Built-in 12V lithium cell or external 12V battery
Technical Parameter
Number of Transmitting Channels: 1
Transmitting Voltage: 100/250/500/750/1000V Optional
1~100μS Adjustable
Pulse Interval: 100ms
Number of Receiving Channels: 2
Adopted Interval: 0.05, 0.1, 0.2, 0.4, 0.8, 1.6, 3.2, 6.4μs
Sampling Length: 512, 1024, 2048, 4096
Triggering Mode: Single, Continuous
Sampling Mode: Single, Continuous, Superposition
Pass Band: 10~250 KHz
Pre-amplification: -20dB (1/10), -14 dB (1/5), -6 dB (1/2), 0dB (1), 6dB (2), 14dB (5), 20dB (10), 26dB (20), 34dB (50), 40dB (100), 46dB (200), 54dB (500), 60dB (1000), 66dB (2000), 74dB (5000), 80dB (10000), Program-Controlled Adjustment
Probe Specification
Related Porduct
CDJ Series Digital Seismic Geophones
DZS-1 Deep Digital Seismograph
DZQ6B Engineering Seismograph (Surface Wave Instrument)
DZQ12/24/48 High Resolution Seismograph (Shallow-Layer Seismograph)