50M 100M Water Depth Counter

2022-11-23

Introduction

The GD-S water gauge with a stainless steel probe has a very durable steel ruler, and the enhanced steel ruler is designed for better quality and durability. The GD-S water gauge probe is designed to allow dives up to 200 m. The sensor at the tip of the probe provides continuous accurate measurements in well, well, and waterfall water with virtually zero displacement.

Composition

The measurement of the water level by the following two parts:

1. Underground material, it is composed by water level pipe and bottom cover (not include in the system,it is need purchased separately) Ground receiver-ruler water level meter, it is composed by detect head, ruler cable, receiver system and cable reel. Detect head: made by steel, inside is a water resistance contact point. When the contact point contact water, the receiver system will open, and when the contact point leave the water,the receiver system will close. Ruler cable: it made by ruler and cable, and use plastic technology keep them together, and avoid thesteel corrosion and simple the operation,make the read more convenient and accurate. Receiver system:it is composed by sounder,indicate light.

2 the green button in the panel is test button, when push this button, light on and buzzing, that indicate the circuit is in good condition. Or else, the circuit have problem or the battery has no power.

Probe of Metal water level measurement devices