Introduction
The drilling rig is a multi-purpose portable all-hydraulic engineering geological exploration rig,which is a rope coring rig with turbine diesel engine as power and adopts full-hydraulic power
head drilling mode. The drilling rig adopts hydraulic drive, modular design,a large number of aviation alloy aluminum as main material, light weight and easy to assemble, easy to and disassemble. The largest module is 150 kg, easy to assemble and disassemble, less space required, does not need to build special roads, does not destroy the surrounding environment and woodland lawn, especially suitable for the completion of core drilling in various harsh environments with high quality, high efficiency and low cost, and plays an active role in geological prospecting and railway engineering prospecting. The core of drilling tool is raised by the draw-
work through the inner hole of drilling piping to complete the core-taking work of geological drilling.
Technical Parameter
Weight of ROCK- -180 rig | |
Cross Weight ≤ 650Kg | |
Power Unit 150Kg | Moto 30Kg |
Driving Head Assy 35Kg | Wirelie Hoist(Inc. Cable) 55Kg |
Control Panel 85Kg | Mud Pump Unit 70Kg |
Feeding Frame 100Kg | Mud Mixer 8Kg |
Foot Clamp 35Kg | Hydralic Oil Tank With Full 80Kg |
ROCK-180 Drill Technical Parameters
| |
Promery Mover | Engine model kubota line 3 cylinders, turbo charged desel engine |
Rated output 24.5Kw | |
working rpm 3000RPM | |
fuel tank capacity 24L | |
Hwdraulic System | hydraulic type multiple pump circulation |
control panel multi-circlation pressure display, intergrated panel | |
cooling method water cooling | |
system presure 21Mpa | |
hydraulic oil tank capacity 30L | |
Rotate Unit | driving type top driving |
rotate speed max 50-1300RPM continue adjustable | |
Output torque max 1243N.M | |
Feeding Unit | adjust range of feeding frame angle 65°~90°(able to extend t 0°~90°) |
cylinder feeding 1.3m strok | |
pulling force (single/double cylinder) 4t/8t | |
Thrust force (single/double cylinder) 2.1t/4.2t | |
Flash Circulation System | mud pump driving type hydraulic drive |
max rated flow rate 120L/min | |
max rated output presure 2MPa | |
hold method slikding chuk jaw | |
Foot Clamp | driving type hydraulic |
max oppening 114mm | |
driying type hudrauli | |
Wireline Hoist | cable dia 5mm |
drump capacity 250m | |
lift force max 10000N | |
line speed max 150m/min |